中文 |  English |  Español  







Online Service:




No.5,Sanlei Road,Shengquan Industrial

Park,Laishan District,Yantai City,China

Copyright©2018 Yantai Zhensheng Plastic Products Co., Ltd. All Rights Reserved. 鲁ICP备11033978号 Powered  manager



Five basic problems about FIBC bulk bags

Zhensheng News
2021/04/29 15:37
Page view

When businesses buy FIBC bulk bags, our customer service will answer every question of the businesses. After a long time of sorting out, we sorted out the five questions we often encounter,
Let's share.
1. What is a coating or laminate on a bulk bag?
The coating, sometimes called a laminate, is an additional polypropylene film that is added to the fabric of the bag and seals small gaps in the Polywoven fabric. The film can
To be added to the inside and outside of the bag.
Laminates can also act as moisture barriers. Polyethylene lining is a better choice for some uses to protect the contents, but please note that either coating or lining

bulk bag
Can't make the bag 100% waterproof.
2. How many products can a bulk bag hold?
Giant safety work bags weigh between 1000 and 4000 pounds, and some specialty bags have a maximum capacity of 5000 pounds - but these bags are not common.
3. Can bulk bags be recycled?
FIBC bags are made of 100% polypropylene and can be recycled. Recycling is feasible for enterprises that use a lot of bags or have a long storage space.
4. Can FIBC be reused?
Bags can be reused under certain conditions, but bags must be designed and rated, and can be used many times. If the safety factor ratio (SFR) of FIBC bag is 6
: 1, it can be reused.
5. What do 5:1 and 6:1 SF mean?
Most woven polypropylene bags are used for only one purpose. The safety factor ratio of disposable bags is 5:1, which means that they can withstand their rated safe working load at most
Five times of SWL. For your own safety, we recommend that you do not fill bags in the safe working load range.
Many woven polypropylene FIBCs are designed for a wide range of uses, with a safety factor ratio of 6:1. This means that they can withstand up to 50% of the safe workload
Six times, and we strongly recommend that bags not be filled within the safe working load range.